Milwaukee M12 Battery Adapter Dock with Soft Wires Power Wheels DIY Robotics

This adapter can easily turn you own DIY project or Robotic project using Milwaukee M12 Battery as power supply

It's designed to fit Milwaukee M12 12v Li-ion Batteries

3D Printed (colors in Grey)

The adapter is made with precise 3d printer, with industry standard PTEG material (weather/heat resistant)

It come with 14AWG silicone soft wire(UL listed cable), Heat resistant up to 200C.

There are 4 mounting holes for RC Robotics/ DIY Project.


-----------------------------------------------------------------------------

Frequently Asked Questions (FAQs)

1. Q: Can this adapter connect to 120v light?

A: No, It can't, it output 12v DC straight from the connected battery.

2. Q: Can this adapter adjust output volt?

A: No, It can't, it output 12v DC straight from the connected battery.

For adjust the output volt, you need to connect a DC-DC Buck Converter.

3. Q: Can I use this adapter charge my battery?

A: No, Very dangerous!!! Li-ion Tools batteries need original charger to charge it.

4. Q: Can this adapter damage my battery?

A: No, this adapter will not damage your battery.

5. Q: What is the amp rating for the adapter and wires?

A: the wires are 14 AWG, 14awg copper the max overcurrent protection is 15 Amp. its allowable ampacity is 20 Amp at 60 deg. C

draw more than 20 AMP continues will burn and will also short battery life(M12 battery is not designed for draw more than 20Amp).